- Demonstrating Industrial Edge example applications
Up until now the Industrial Edge 2.0 validated patterns has focused primarily on successfully deploying the architectural pattern. Now it is time to see GitOps and DevOps in action as we go through a number of demonstrations to change both configuration information and the applications that we are deploying.
If you have already deployed the data center and optionally a factory (edge) cluster, then you have already seen several applications deployed in the OpenShift GitOps console. If you haven’t done this then we recommend you deploy the data center after you have setup the Quay repositories described below.
In the Quay.io registry please ensure you have the following repositories and that they are set for public access. Replace your-org with the name of your organization or Quay.io username.
These repositories are needed in order to provide container images built at the data center to be consumed by the factories (edge).
Make sure you have
git and OpenShift’s
oc command-line clients.
Make sure you have the
kubeadmin administrator login for the data center cluster. Use this or the
kubeconfig (export the path) to provide administrator access to your data center cluster. It is not required that you have access to the edge (factory) clusters. GitOps and DevOps will take care of the edge clusters.
You will need to login into GitHub and be able to fork two repositories.
There will may be times where you need to change the configuration of some of the edge devices in one or more of your factories. In our example, we have various sensors at the factory. Modification can be made to these sensors using
In this demonstration we will turn on a temperature sensor for sensor #2. We will first do this in the data center because this will demonstrate the power of GitOps without having to involve the edge/factory. However if you do have an factory joined using Advanced Cluster Management, then the changes will make their way out to the factory. But it is not necessary for the demo as we have a complete test environment on the data center.
Make sure you are able to see the dashboard application in a tab on your browser. You can find the URL for the dashboard application by looking at the following in your OpenShift console.
Select Networking->Routes on the left-hand side of the console. Using the Projects pull-down, select
manuela-tst-all. Click on the URL under the Location column for the route Name
line-dashboard. this will launch the line-dashboard monitoring application in a browser tab. The URL will look like:
Once the the application is open in your browser, click on the “Realtime Data” Navigation on the left and wait a bit. Data should be visualized as received. Note that there is only vibration data shown! If you wait a bit more (usually every 2-3 minutes), you will see an anomaly and alert on it.
Now let’s turn on the temperature sensor. Using you favorite editor, edit the following file:
SENSOR_TEMPERATURE_ENABLED: "false" to
Then change and commit this to your git repository so that the change will be picked up by OpenShift GitOps (ArgoCD).
git add industrial-edge-charts/data/center/manuela-test/templates/machine-sensor/machine-sensor-2-configmap.yaml git commit -m "Turned on temprature sensor for machine sensor #2" git push
You can track the progress of this commit/push in your OpenShift GitOps console in the
manuela-test-all application. You will notice components regarding machine-sensor-2 getting sync-ed. You can speed this up by manually pressing the Refresh button.
The dashboard app should pickup the change automatically, once data from the temperature sensor is received. Sometimes a page/tab refreshed is needed for the change to be picked up.
line-dashboard application has temperature sensors. In this demonstration we are going to make a simple change to that application, rebuild and redeploy it. In the
manuela-dev repository there is a file
Depending on the state of your
manuela-dev repository this may or may not be commented out. Ideally for the demonstration you would want it uncommented and therefore effective. What this means is that while the labels on the frontend application are showing Celsius, the data is actually in Fahrenheit. This is a good place to start because that data won’t make any sense.
Machines running over 120C is not normal. However examining the code explains why. There is an erroneous conversion taking place. What must happen is we remove or comment out this code.
If you haven’t deployed the uncommented code it might be best to prepare that before the demonstration. After pointing out the problem, comment out the code.
Now that the erroneous conversion code has been commented out it is is time rebuild and redeploy. First commit and push the code to the repository. While in the directory for your
manuela-dev repository run the following commands. The
components/iot-consumer/index.js file should be the only changed file.
git add components/iot-consumer/index.js git commit -m "commented out C to F temp conversion" git push
Now its time to kick off the CI pipeline. Due to the need for GitHub secrets and Quay secrets as part of this process, we currently can’t use the OpenShift console’s Pipelines to kick off the pipeline in the demo environment. Instead, use the command-line. While in the
industrial-edge repository directory, run the following:
This build takes some time because the pipeline is rebuilding all the images. You can monitor the pipeline’s progress in the Openshift console’s pipelines section.
Alternatively you can can try and run the shorter
build-iot-consumer pipeline run in the OpenShift console. This should just run and test the specific application.
You can also see some updates happening in the
manuela-tst application in OpenShift GitOps (ArgoCD).
When the pipeline is complete check the
lines-dashboard application again in the browser. More reasonable, Celsius, temperatures are displayed. (Compare with above.)
The steps above have successfully applied the change to the Manuela test environment at the data center. In order for these changes to be pushed out to the factories it must be accepted and pushed to the Git repository. Examine the project in GitHub. There is a new Pull Request (PR) called Pull request created by Tekton task github-add-pull-request. Select that PR and merge the pull request.
OpenShift GitOps will see the new change and apply it out to the factories.
After a successful deployment of Industrial Edge 2.0, check to see that Jupyter Hub is running. To do this go to project
manuela-ml-workspace check that
jupyterhub pods are up and running.
Then, in the same project
manuela-ml-namespace, select Networking/Routes and click on the URL associated with
jupyterhub in the Location column.
This will bring you to a web page at an address in the following format:
Options for different types of Jupyter servers are shown. There are two options that are useful for this demo.
- Standard Data Science. Select this notebook image for simpler notebooks like
- Tensorflow Notebook Image. Select this notebook image for more a complex notebook that require Tensorflow. E.g.
At the bottom of the screen there is a
Start server button. Select the type of Notebook server image and press
Selecting Tensorflow notebook image:
On the next screen upload the following files from
- One of the Jupyter notebooks
Data-Analyses.ipynbfor a somewhat simpler demo
Anomaly Detection-using-TF-and-Deep-Learning.ipynbfor a Tensorflow demo.
Open the notebook by double clicking on the notebook file (ending in
After opening the notebook successfully, walk through the demonstration by pressing play and iterating through the commands in the playbook. Jupyter playbooks are interactive and you may make changes and also save those changes. Also, some steps in the notebook take milliseconds, however, other steps can take a long time (up to an hour), so check on the completion of steps.
Remember that changes to the notebook will require downloading, committing, and pushing that notebook to the git repository so that it gets redeployed to the factories.
There is one other area that has not been completed for the overall validated pattern. The unfinished part is the streaming of events from the factory back to the datacenter and adding that data to the data lake for data scientists to apply their “magic”.
The automation for this is complete. However, there are certificates and/or keys that need to be replaced in the following files for the datacenter and factory templates:
industrial-edge/charts/datacenter/kafka/templates/kafka-tls-certificate-and-key.yaml industrial-edge/charts/factory/templates/factory-kafka-cluster/kafka-tls-certificate-and-key.yaml industrial-edge/charts/factory/templates/factory-mirror-maker/kafka-tls-certificate.yaml
See the Yaml files for more details.
After updating these files with the proper certs/keys, apply the changes to the OpenShift cluster using